![Garz & Fricke VINCELL 7.0](http://html1.mh-extra.com/html/garz-and-fricke/vincell-7-0-boxed/vincell-7-0-boxed_manual_3645406009.webp)
VINCELL 7.0" Boxed
Manual
9
Resistive Touch
Type
4-wire analog resistive
Linearity
<=1.5%
Surface Treatment
antiglare
Power Supply and Consumption
Supply [V DC]
Nom. 24 ± 15%
Max. 9 ~ 36
PoE Supply (optional)
IEEE 802.3at-2009 class 4
Consumption [W]
Typ. 4.8
Internal Backup Battery
(RTC and SRAM)
Type
3 V lithium manganese dioxide Type CR1220
Lifetime (RTC only)
Approximately 8 years, depending on application
Lifetime (RTC+SRAM)
Approximately 2 years (75% power down)
Housing
Back Cover
1.4016 high quality steel, polished, 0.8mm
Front
Frame 4 mm AlMg3
Décor 180µ ± 10% polyester film, antiglare, 91% ± 2% luminous
transmission, pencil hardness 3H (refer to
Approximate Dimensions
W x H x D [mm]
tbd.
Weight [g]
490
Environment
Humidity [%]
5 ~ 95 (non condensating)
Ingress Protection
IP 20
Operating Temperature [°C] 0 ~ +60
Storage Temperature [°C]
-20 ~ +70
Max. Operating Altitude [m]
up to 3,000 (10,000 ft)
Max. Storage/Transit
Altitude [m]
up to 10,000 (32,814 ft)
Noise Level [db(A)] @ 1m
<<40 (fanless design)
Lifetime
Backlight Lifetime
5
LCD
Display [h]
40,000
Operating Lifetime Touch
100,000 (by pen), 1,000,000 (by finger)
MTBF
6
[h]
≥ 50,000
5
Backlight lifetime is dictated by the LCD manufacture´s specification. Backlight lifetime is the approximate time at which
the brightness decreases to half of its original brightness. Reduction of brightness due to backlight lifetime is not
considered as failure. It is a natural aging of all electronic components.
6
Electrical products use the industrial standard term Mean Time between Failure (MTBF) as a statistical prediction of the
elapsed time between failures in a large population of systems.
The MTBF of all Garz & Fricke HMI products shall be 50,000 hours
A failure is anything that causes the product not to function to its specifications
Reduction in brightness due to backlight lifetime is not a failure
If the LCD used in the system exceeds its pixel defect specification it is considered a failure
Содержание VINCELL 7.0" Boxed
