Garudan GZ-5525 Series, Руководство пользователя и каталог запасных частей

Страница: 18 / 69

© ANITA
18 GZ-5525 series MP04600EN_220920
D11. AUTOMATIC MACHINE CONTROL
Control pedal
The pedal position is scanned with a proximity switch which distinguishes 16 levels.
The meaning is in the table:
Pedal position Pedal motion Meaning
-2 Heel fully backwards Command for thread trimming (seam finish)
-1 Heel slightly backwards Command for foot lifting
0 Neutral position See note
1 Slightly forwards Command for foot lowering
2 Further forwards Sewing at minimum speed (1 gear)
3 Further forwards Sewing – second speed gear
: : :
13 Fully forward Sewing at maximum speed (12 gear)
Note: The needle position can be pre-selected for the neutral position (needle down/up) as well as
for the foot position (down/up) at the seam-stop (by putting the pedal in the neutral position), and
for the foot position (down/up) after the seam finishing (by treading the pedal with heel fully
backwards and putting the pedal in the neutral position)