Garudan GPS/X-3525 Series, Руководство пользователя

Страница: 14 / 79

© ANITA
MP03200 EN_180810 14
8. Adjusting height of presser foot:
Adjustment of the foot is described in
Chapter 4, page 17. The presser foot is
mounted on the presser bar to the end of
casting. If you need to adjust the through
hole on the needle axis, loosen the presser
foot 1 by loosening the screws. Rotate the
presser foot onto the needle axis and
tighten the screws. By default, the foot is
about 1 mm above the insert plate, Fig. 13.
Fig. 13
9. Used oil disposal:
The oil container (1) attached under the
base table should be taken away for cleanup
after it is full with oil, see Fig. 14.
Obr. 14
www.garudan.cz