Garudan GF-1107-147 MH, Руководство пользователя и каталог запасных частей, Страница: 11 / 68

ANITA ©
MP02300EN_170818 11
8. Attaching the needle
Warning: Turn OFF the power before starting the work so as to prevent
accidents caused by abrupt start of the sewing machine.
A needle of DBx1 or DPx5 should be used. Select a proper needle size according to the count of
thread and the type of material used.
1. Turn the hand-wheel until the needle bar reaches the highest point of its stroke.
2. Loosen screw ②, and hold needle ① with its indented part A facing exactly to the right in
direction B.
3. Insert the needle fully into the hole in the needle bar in the direction of the arrow until the end of
hole is reached.
4. Securely tighten screw②.
5. Check that long groove C of the needle is facing exactly to the left in direction D.
Caution: When filament thread is used, if the indented part of the needle is tilted toward
operator`s side, the loop of thread becomes unstable, As a result, hangnail of thread or thread
breakage may occur. For the thread that such phenomenon likely to occur, it is effective to attach
the needle with its indented part slightly slanting on the rear side.
www.garudan.cz