Step 3 : Assembling the Ground Anchors
3.-1
Fix ground anchor T into the bottom hole of each 4 leg. Using bolt set
(bolt Ax1 + washer Ix1 + spring washer Fx1 + domenut Jx1).
3.-2
Dig 60 cm depth cave and put cement in size 30x30x50cm (LxWxH).
Take ground anchor T into cement when cement is soft.
3.-3
Make sure ground anchor T is well fixed in cement to prevent this product
overturning. When cement is hard, cover the cave with soil.
3.-4
When selecting a place to install the equipment, take into account the space
required for the training activity. Allowing a margin of at least 2 m on all sides.
For this reason, avoid positioning the equipment near protruding elements,
walls, treescape, etc.
3.-5
Once the equipment has been assembled, make sure that it is placed
safely and completely stable, never on carpet (it must be
3.-6
Do not install the equipment inside the sauna or any wet area.
Page 5 of 6
Because it may cause rusty.
perfectly stable, not least under conditions of maximum load).
