Magnum Quad-Series Fiber Switches
Installation and User Guide (06/09)
26
www GarrettCom com
.
.
Step 2. Remove Chassis Cover
The Magnum Q-Series chassis are combined with top and bottom part and
assembled together with the help of 20 Philips head screws. There are 7 screws located
on front-top of the unit and three screws each on the left and right edges. Remove these
screws. Once these are removed, the top cover is easily lifted off the chassis base. When
the chassis top cover has been removed, the interior of the unit is exposed.
Figure 3.9.1a:
Removing Chassis Cover
Caution: Be careful not to disturb the power supply.
Looking down into the Magnum Q-Series unit, notice that there are individual
QPM connector sockets along with two stand-offs for each QPM card position. There are
four QPM slots located on the front of the QS5116 model, whereas QS580 and QS5108
has two QPM slots in the front. (See Figure 3.9.1b).
Power Input
20 Phillips Head Screws on Top
PWR
G A R RE TT
TopChassis Cover
Magnum QS5116
Fiber Switch
Front of Unit
Media Connector
with electronic
elements
Right
Side
Left
Side
Cooling Fan
Power Supply Board
LED Status Slot
Eight QPM Slots
AC Power Input
Back of Unit
