Magnum ITS
Blade
Hardened Switches for 2070’s Installation and User Guide (02/03)
6
The Magnum ITS
Blade
Ethernet Switch, equipped with six 10/100 RJ-45 ports and
two 100Mb Fiber ports, easily connects to local Ethernet devices at the intersection such as
video cameras and the Model 2070 Controller, while two Ethernet 100Mb fiber optic ports
connect upstream to the TOC or to intermediate Ethernet switches in the traffic control network.
The Magnum ITS
Blade,
entirely contained in a standard 2070 Traffic Control Chassis, draws its
power from the 2070 chassis power supply. Noo 2070 chassis backplane signal pins are used
The ITS
Blade
module easily can be fitted into either a new or existing 2070 chassis
without creating any conflict with other installed modules. The Magnum ITS
Blade
specifications comply with Caltrans and NEMA TS-2-1998 Standards for Traffic Controller
Assemblies.
The two “future-proof” fiber ports have been designed as full-duplex 100Mbps
switched fiber ports. Six copper (RJ-45) with full / half-duplex-10/100-auto-negotiating ports
are included. The Magnum ITS
Blade
Hardened Switches provide the switching speed and the
reliability to smoothly support streaming Ethernet traffic at 100Mbps or 10Mbps speed. The
optional fiber ports are normally configured and tested with the ITS
Blade
in the factory, and are
available in multi-mode and single-mode SC-type fiber connectors.
Designed specifically to operate in Model 2070 Traffic chassis in temperature
un
controlled road side boxes, the Magnum ITS
Blade
can easily sustain the heat…. and the cold.
Armored with unique thermal techniques (patent pending) developed by GarrettCom
technologists extend the ambient temperature operating range beyond standard product ratings,
www GarrettCom com
.
.
