Magnum 1000 Workgroup Hubs Installation and User Guide (04/02)
2
www GarrettCom com
.
.
Power Supply (Internal)
AC Power Connector: IEC-type, male recessed, rear of chassis
Input Voltage: 90 to 260 VAC (auto-ranging)
Input Frequency: 47 to 63 Hz (auto-ranging)
Power Consumption: 10 watts typical, 20 watts max. P.S. rating
(For 48VDC power input option, see Appendix B).
Agency Approvals
UL Listed (UL 1950), cUL, CE
Emissions meet FCC Part 15 Class A
Warranty
Three years, return to factory
Made in USA
1.2
Specifications - Repeater Port Modules (RPMs)
RPM Type :
BNC
AUI
DTE
Fiber-mm Fiber-sgl.m
TP*
Front Access
yes
yes
yes
yes
yes
yes
Connector Type
BNC-f DB-15 f DB-15 m
Fiber-ST Fiber-ST
RJ-45
Partition (PART)LED
yes
yes
yes
yes
yes
yes
Receive (RX) LED
yes
yes
yes
yes
yes
yes
LINK LED
n.a.
n.a.
n.a.
yes
yes
yes
Switch on Face Plate yes** n.a.
n.a.
n.a.
n.a.
yes***
“Fiber-mm” is multi-mode cable, normally used for 10BASE-FL installations, up to
2.0Km.
“Fiber-sgl.m” is single-mode cable, used for distant installations, up to 10.0Km.
* The RJ-45 connector is shielded; it accepts RJ-45 eight-pin plugs for unshielded
and shielded twisted pair wiring.
** Internal termination switch for BNC, no "T" connector is required.
*** MDI-X (Media Dependent Interface - Crossover) switch for RJ-45 up-link,
no crossover cable is required.
1.3
Specifications - Bridge Port Modules (BPMs)
BPM Type :
BNC
AUI
Fiber
TP*
Connector Type
BNC(f) DB-15(f)
ST
RJ-45
Switch on FP
yes**
n.a.
n.a.
yes***
FWD-I LED
yes
yes
yes
yes
FWD-X LED
yes
yes
yes
yes
LINK LED
n.a.
n.a.
yes
yes
* The RJ-45 connector is shielded; it accepts RJ-45 eight-pin plugs for unshielded
and shielded twisted pair wiring.
** Internal termination switch for BNC, no "T" connector is required.
*** MDI-X (Media Dependent Interface - Crossover) switch for RJ-45 up-link,
no crossover cable is required.
