C
HAPTER
2 -
Supervisor Overview
Universal Commands For Supervisor Menu Navigation
DS2000-TS Administrator’s Guide
2 - 2
2.2.2 Navigation
To navigate down to a submenu:
•
Type the command number and press
<Enter>
.
- or -
•
Use the cursor keys (left, right, up and down arrows) to move to the desired function, and
press
<Enter>
.
To return to a previous menu:
•
Press the
<Esc>
key.
- or -
•
In menus with no modifiable fields, pressing the left arrow will display the previous menu.
To navigate within a modifiable menu:
•
Use the cursor keys to move around the fields
•
Use the
<Tab>
key to send the cursor to the next modifiable field.
•
Press <Tab> repeatedly to get to the Process selections field. Or, while in the leftmost field
of the screen, press the left arrow key. This sends the cursor to the bottom right corner, which
is the Process selections field. The Process selections field appears on each screen where
there are modifiable parameters and is used to save the changes to volatile memory.
Although selecting Y and pressing
<Enter>
in the Process selections field saves the
changes, the user must also save the changes to Flash memory.
To change a modifiable field:
•
To modify fields containing multiple toggle options, move the cursor with the arrow keys or
<Tab>
key until it is in the field to be modified. Pressing
<Enter>
toggles the parameter to
the next option. Pressing the
<Enter>
key repeatedly cycles through all the field options.
Moving out of the field temporarily sets the field to the value entered. The change will
become permanent when the user saves the changes.
•
To enter information in a text or number field, place the cursor in the field and type the
desired information. Moving the cursor out of the field stops editing the data field, and
temporarily sets the field to the value entered. The change will become permanent when the
user saves the changes.
To edit input
•
The Supervisor Console is preconfigured to use the
<Backspace>
and
<Delete>
keys for
editing characters.
2.2.3 Saving Changes
Before a change can be saved to Flash memory it must first be processed. This adds the information to the
system from which the Flash memory is updated. The Process selections field is in the lower right corner of
all modifiable menus. To process the changed configuration information, move the cursor to the Process
selections field. The Process selections field should contain a
<Y>
but if it is
<N>
type in the letter
<Y>
and
press the
<Enter>
key. If the user does not wish to save the changes made, either press
<Esc>
to go back to
the previous menu, or type
<N>
in the Process selections field and press
<Enter>
.
Содержание DynaStar DS2000-TS
