38 Garrett Metal Detectors
AT Pro International™ 39
You can reverse this pinpointing technique to pinpoint off
the DD coil's tail; in this case, push the coil away from you.
The audio and LCD meter will place the target just off the
searchcoil's tail.
•
Alternative pinpointing technique: DD-wiggle
. Quickly
locate targets
without using the Pinpoint button
as follows.
Continuously swing the searchcoil side-to-side using fast,
narrow swings of 5–10cm (i.e. wiggle). While continuing
this side-to-side wiggle, slowly move the searchcoil sideways
toward the target's suspected position until the audio response
produces a consistent, symmetric beat. This indicates the
lateral left-to-right position of the target. Then locate the
target's front-to-back position by rotating around 90° and
repeating the same process.
Tip:
Practice any or all of these various pinpointing options in
your test plot. Choose the technique that works best for you.
As you improve your pinpointing accuracy, you will dig smaller
holes and increase your productive hunting time.
• Begin hunting in STD Mode, then switch to PRO Mode after
you have become more experienced.
• If you are new to metal detecting, start searching in areas
with sandy and loose soil to make it easier to learn how to
use your metal detector, pinpoint and dig targets.
• Keep your searchcoil at a constant height of 2 to 3 cm
above and parallel to the ground at all times for best
detection results. Do not lift or tilt the coil at the end of
swings.
HUNTING TIPS
CORRECT
SWING
INCORRECT
SWING
