manualshive.com logo in svg

Garrett AT Max, Руководство пользователя

Поделиться
Скачать
Garrett AT Max Скачать руководство пользователя страница 26

50 Garrett Metal Detectors

AT Max

™ 

51

 Your 

AT Max

 detector is warranted for 24 months, limited parts 

and labor, but does not cover damage caused by alteration, 
modification, neglect, accident or misuse.
  In the event you encounter problems with your 

AT Max 

detector please read through this Owner’s Manual carefully to 
ensure the detector is not inoperable due to manual adjustments. 
Press and hold the power button for 5 seconds to return to the 
recommended factory settings.    
  You should also make certain you have:

1. Checked your batteries and connectors. Weak batteries are the  
  most common cause of detector “failure.”

2. Contacted your dealer for help, particularly if you are not familiar  
  with the 

AT Max

 detector.

  In the event that repairs or warranty service are necessary for 
your 

AT Max

, contact the local retail outlet where your detector 

was purchased. To avoid excessive shipping and import charges, 
do not attempt to return a Garrett product  to the factory in the 
United States. 
   Information on international warranty/repair needs can be 
found on the Garrett website: 

www.garrett.com

. Click on the 

Sport Division and then the Warranty/Support menu for more 
details.

AT Max Warranty and Service

This device complies with part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause 
undesired operation. 
  Changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to 
operate the equipment.
  This device complies with Industry Canada license-exempt RSS 
standard(s). Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this device 
must accept any interference, including interference that may 
cause undesired operation of the device.
   Ce produit est conforme aux normes RSS exemptes de licence 
d’Industry Canada. Son fonctionnement est soumis aux deux 
conditions suivantes  : (1) ce dispositif ne peut pas provoquer 
d’interférences et (2) ce dispositif doit accepter toute interférence, 
y compris celles pouvant entraîner un dysfonctionnement. 

Wireless Transmitter Specifications

Audio Delay: 

 

17 milliseconds (6x faster than Bluetooth®)

Audio Bandwidth: 

30-18,000 Hz

Operating Frequency:  2406–2476 MHz
Transmit Power:   

8.6 dBm EIRP

Certifications:  

 

FCC, CE, IC, AS/NZ

Regulatory

Содержание AT Max




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды