4
5
EN
EN
An RFID reader can be added alongside the GLB Wallbox, to be installed at a set
location. It is connected to the wallbox's printed circuit board header labelled ‘RFID’ using
the accompanying cable. The RFID reader can read RFID tags complying with Mifare
1K, 4K and Mifare Ultralight specifications. Once the RFID reader has been installed,
‘Request RFID when connecting’ is displayed on the Wi-Fi wallbox's website under
‘Settings’.
The RFID reader can be installed in an individual wallbox which has Wi-Fi connectivity. It
can also be installed in boxes with or without Wi-Fi where the boxes are connected into
a group, and at least one of them has Wi-Fi connectivity.
INSTALLATION OF RFID READER
The power supply to the wallbox must always be turned off when the RFID reader
is installed.
