GARO ENTITY PRO, Установка и эксплуатация

Страница: 18 / 91

4.4 TO DO A PLAN FOR THE INSTALLATION
•
Prepare the installation location according to the
steps that are shown in the illustration.
A. Decide where to put the charging station(s).
Make sure that a suitable location due to
weather conditions and preparation for future
expansion.
NOTE
Charging station(s) can be attached to a wall, a stand
or a pole. Installation accessories are available at
GARO.
B. Decide on how to define the location and
naming of the charging station(s).
C. Decide on access control for EV drivers. It is
possible to control access with the GARO
Connect app or RFID tags where controlled
authorization is necessary. Those can also be
combined in a schedule.
NOTE
RFID tags are available as accessories at GARO.
D. Plan the power supply and current availability
on all levels of the installation. Plan for the DLM
(dynamic load management) system setup. Refer
to 4.14.1 Dynamic Load Management (DLM)
functionality, page 62 .
E. If several charging stations are used, decide
which charging station that should act as master
charging station. This can be affected by a DLM
setup.
J I K
F E G
B A C
H
D
L
N M O
WWW
18
Installation