9
EN
GNM1D
-RS485
GNM1D
-RS485
GNM1D
-RS485
GNM1D
-RS485
GNM1D
-RS485
8
Final step
3. Press lower touch area 2 seconds to confirm and current stopbit setting is visible.
4. Press lower touch area 2 seconds and stopbit value is visible. Correct value is ”1”. Click upper touch area to change the value if
needed.
5. Confirm by press lower touch area 2 seconds. PArItY is visible.
1. Click upper touch area until you see End is visible. Press and hold lower touch area for 3 seconds or wait for 2 min to leave
programming mode.
