Garnet SEELEVEL II 709-LL, Руководство пользователя

Страница: 29 / 32

Page 29
709-LL Manual
CHAPTER 9 - SPECIFICATIONS
Resolution: ES sender: 3/8 inch (10 mm)
JS sender: 1/4 inch (6 mm)
Accuracy: +/- 8% or better, limited by resolution and
tank height and shape
Temperature range: +32 to +140 oF (0 to + 60oC)
Sender materials: 0.008” thick glass epoxy circuit board with
conformal coating for circuit protection.
Laminated on the back with 3M 300LSE
Bonding Adhesive.
Sender length range: ES sender: 4-1/2 to 12 inches, which will
measure tank heights from 5” to 14” (single
sender) and up to 26” (dual senders).
JS sender: 4 to 6 inches, which will measure
tank heights from 4 1/2” to 7”.
Display mounting panel: Black panel, approximately 4”” wide by 2.8”
high by 1” thick (102mm wide X 71mm high
X 25mm deep). Panel screws to wall.
Power requirements: Display requires 12 volts from the RV battery,
the system will function from 11 volts to 16
volts. Current drain is less than 200mA.
Wiring: A single two wire conductor required from
the display to the senders. All the senders
are wired in parallel. 12 V power and ground
required for display.