Garnet MULTIRACK 688-D, Руководство пользователя

Страница: 9 / 14

Page 9 688 Manual
13. Inspect the controller enclosure cap for casting flash, and
lightly sand or scrape off any casting protrusions. Make sure
that the rubber O ring is in place and has grease on it. Orient
the cap so that the holes for the LEDs line up with the holes in
the label and then snap on the cap.
14. Record the truck unit number, compartment number, and
the level of the rack shutdown point in the IMPORTANT
OPERATOR INFORMATION area on the front page of the
S
EE
L
EVE
L gauge users manual. The truck operator must
be given the owners manual upon delivery with all front
page data filled in.
The following wiring diagram illustrates a B-train with a single
compartment lead equipped with a
S
EE
L
EVE
L, and a dual
compartment pup equipped with two S
EE
L
EVE
L S
PECIALs
.