4 of 26
NOTE!
If the safety glass for the oiling process is open, the
lamp starts flashing.
NOTE!
During the initialization process, please do not feed
any material into the shredder!
7. “Lubricate cutting mechanism” pilot lamp (Fig. 1/7)
Lights up if the machine needs to be lubricated.
8. “Material jam” pilot lamp (Fig. 1/8)
Lights up if the cutting mechanism is jammed.
9. “Cutting mechanism ready” / “Cutting mechanism
not ready” curved pilot lamps (Fig. 1/9)
Lights up green if the cutting mechanism can be fed.
Lights up red if the cutting mechanism cannot be fed.
3.2 “Feed slot” operator unit
Fig. 2 Garner FLASHPRO feed slot
Fig. 3 Feeding through the feed flap
1. Safety glass (Fig. 2/1)
The machine only runs if the safety glass is closed.
2. Feed flap (Fig. 2/2)
Feed the material through the device’s feed flap. This starts
the cutting mechanism.
3.3 Turning the machine on
3.4 Initializing process
Briefly press the function button (Fig. 1/1).
➢
The LED display on the function button lights up to
indicate “ready for operation.”
➢
You can now feed the machine.
Start the initialization process (when the machine
is off):
3.5 Starting the shredding process
DANGER!
Risk of injury! Damage to the machine!
☞
Remove batteries from the device before
shredding it!
CAUTION!
Material jam! Damage to the machine!
▲
Feed the data carriers into the machine
individually, one ater another! This lets the Garner
FLASHPRO reach its best performance.
▲
If too much material has reached the cutting
mechanism, see
“Material jam”
. Section 4.1
Feeding through the feed flap (Fig. 3/2)
Slip small data carriers, like USB sticks, mobile phones
or SSD disks, through the feed flap into the cutting
mechanism.
➢
The shredding process starts automatically.
➢
After destroying the data carrier, the machine shuts off
automatically.
Feeding through the safety glass (Fig. 3/1)
1. For larger data carriers, e.g. mini tablets, push the safety
glass back and feed the data carrier into the cutting
mechanism.
2. Close the safety glass again.
1. Briefly press the function button (Fig. 1/1).
➢
The machine turns on.
2. Briefly press the forward button (Fig. 1/2).
➢
The initialization process starts. The cutting mechanism
switches five times between forward and backward
operation.
➢
The cutting mechanism stands still. You can now feed the
machine.
US
1. Safety glass
2. Feed flap
2
1
1. Safety glass
2. Feed flap
1
2
