Garmin Volvo Penta Glass Cockpit B12, Руководство пользователя

Страница: 27 / 106

When course over ground and heading information are
provided by an activated AIS target, but rate of turn
information is not provided, the projected course of the
target is calculated based on the course over ground
information.
Activating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2 Select AIS Vessel > Activate Target .
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed,
GPS heading, and other information that is reported about
a targeted AIS vessel.
1 From a chart or a 3D chart view, select an AIS vessel.
2 Select AIS Vessel .
Deactivating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2 Select AIS Vessel > Deactivate .
Viewing a List of AIS and MARPA Threats
1
From a chart, select Menu > Layers > Other Vessels
> List > Show .
2 Select the type of threats to include in the list.
Setting the Safe-Zone Collision Alarm
CAUTION
The Beeper setting must be turned on to make alarms
audible (
Sounds and Display Settings , page 75 ). Failure
to set audible alarms could lead to injury or property
damage.
Before you can set a collision alarm, you must have a
compatible chartplotter connected to an AIS device or
radar.
The safe-zone collision alarm is used only with AIS and
MARPA. MARPA functionality works with radar. The safe
zone is used for collision avoidance and can be
customized.
1 Select Settings > Alarms > Collision Alarm > On .
A message banner appears and an alarm sounds
when a MARPA-tagged object or an AIS-activated
vessel enters the safe-zone area around your boat.
The object is also labeled as dangerous on the screen.
When the alarm is off, the message banner and
audible alarm are disabled, but the object is still
labeled as dangerous on the screen.
2 Select Range , and select a distance for the safe-zone
radius around your vessel.
3 Select Time To , and select a time at which the alarm
will sound if a target is determined to intersect the safe
zone.
For example, to be notified of a pending intersection
10 minutes before it will likely occur, set Time To to 10,
and the alarm will sound 10 minutes before the vessel
intersects the safe zone.
4 Select MARPA Alarm , and select an option for when
the alarm sounds for MARPA-tagged objects.
AIS Aids to Navigation
An AIS aid to navigation (ATON) is any kind of
navigational aid that is transmitted over the AIS radio.
ATONs are displayed on the charts and have identifying
information, such as position and type.
There are three main kinds of AIS ATONs. Real ATONs
physically exist and send their identifying and location
information from their actual location. Synthetic ATONs
physically exist, and their identifying and location
information is sent from another location. Virtual ATONs
do not actually exist, and their identifying and location
information is sent from another location.
You can view AIS ATONs on the chart when the
chartplotter is connected to a compatible AIS radio. To
show AIS ATONs, from a chart, select
Menu > Layers >
Chart > Navaid > ATONs . You can view more
information about an ATON if you select the ATON on the
chart.
Symbol Meaning
Real or synthetic ATON
Real or synthetic ATON: Topmark North
Real or synthetic ATON: Topmark South
Real or synthetic ATON: Topmark East
Real or synthetic ATON: Topmark West
Real or synthetic ATON: Topmark Special
Real or synthetic ATON: Topmark Safe
Real or synthetic ATON: Topmark Danger
Virtual ATON
Virtual ATON: Topmark North
Virtual ATON: Topmark South
Virtual ATON: Topmark East
Charts and 3D Chart Views 15