1
Remove the ANT wireless adapter from the USB port, and
connect a mouse.
2
Click anywhere on the screen.
3
Enter the device lock password.
NOTE:
If you forget the device lock password, you can reset
it (
Resetting the Device Lock Password
).
Device Lock Disabled
appears at the top of the screen.
Changing the Wireless Network Connection
You can change the wireless network connection on the device.
NOTE:
This device uses the default Android 4.2 network
application to connect to and configure your wireless network
settings.
1
Unlock the device (
).
2
Select
SETTINGS
>
Wireless Network
>
Configure
Wireless Networks
.
The Android wireless network settings window opens.
3
Select
Configure Wireless Networks
.
4
Select an option:
• To disconnect from a connected network, select the
network, and select
Forget
.
• To connect to a standard wireless network, select the
SSID, and enter the password if necessary.
• To add a wireless network manually by specifying
advanced networking settings, select .
• To connect to a wireless network using WPS, select ,
and either scan for a WPS-enabled network or enter a
WPS PIN.
The status of the selected network changes to Connected.
5
Select
Next
.
Setting Software Update Preferences
A device software update downloads automatically when the
device is connected to Garmin Connected Services and an
update is available. You can specify when the update is
installed.
1
Unlock the device (
).
2
Select
SETTINGS
>
Software Updates
.
3
Select an option:
• To install updates the same day they are downloaded,
select
Whenever available (Default)
. The update occurs
late in the evening, not during typical business hours.
• To postpone the installation of downloaded updates so
they can be implemented on a single device before a
wider deployment, select
30 days after available date
.
The administrator is notified of downloaded updates in the
Garmin Connect application, and appears on the status
screen. The updates can be installed manually on each
device, or automatically after 30 days (
).
Manually Installing a Software Update
If you select the 30 days after available date option during the
initial setup, a downloaded software update is not installed
automatically (
Setting Software Update Preferences
).
You can install the update manually after you have implemented
it on another device.
1
Unlock the device (
).
2
Select
SETTINGS
>
Software Updates
>
Check for Update
Now
.
If a downloaded software update is ready to install, a window
opens.
3
Select
Install Updates
.
Managing Garmin Connect Registrations
After you successfully register a vívohub 2 device with your
Garmin Connect account, you can access a vívohub remote
monitoring widget through the Garmin Connect dashboard. The
widget shows the current status of every registered vívohub 2
device.
You can register the vívohub 2 device to more than one Garmin
Connect account.
1
Unlock the device (
).
2
Select
SETTINGS
>
Garmin Connect™ Registration
.
3
Select an option:
• To register the device with a Garmin Connect account,
select
Register New Account
> , and enter the account
information.
TIP:
If you intend to monitor the device from other Garmin
Connect accounts, you can repeat this process to register
the device with each of the other accounts.
• To remove the device from a registered Garmin Connect
account, select next to the name of the account, and
select
Continue
.
4
Select
BACK
.
Changing Time Settings
You can change the local time settings, including the time zone
and daylight saving time adjustments.
1
Unlock the device (
).
2
Select
SETTINGS
>
Local Time
.
3
Select an option:
• To change the time zone, select
Select Time Zone
, and
select a different time zone.
• To change the daylight saving time settings, select
Configure Daylight Saving Settings
(
).
Daylight Saving Time Settings
You can customize specific daylight saving time (DST) start and
end date settings for your time zone.
Select
Custom
>
Local Time
>
Configure Daylight Saving
Settings
>
Custom
.
By Pattern > Set Start
: Sets a day of the month to start DST.
By Pattern > Set End
: Sets a day of the month to end DST.
By Pattern > Set Offset
: Sets the time offset when DST is
active.
By Date > Set Start
: Sets an exact date to start DST.
By Date > Set End
: Sets an exact date to end DST.
By Date > Set Offset
: Sets the time offset when DST is active.
Specifying a Custom Time Server
The time server periodically checks the Internet to keep
accurate time on the device. You can specify a custom time
server instead of the default time server used by the Android
operating system.
1
Unlock the device (
).
2
Select
SETTINGS
>
Time Server
>
Custom
>
Set Server
URL
.
3
Enter the URL of the custom time server, and select
Save
.
Changing the Device Lock Password
1
Unlock the device (
).
2
Select
SETTINGS
>
Change device lock password
.
3
Enter the current device lock password and new device lock
password.
4
