Garmin VIRB Ultra 30, Быстрый старт

Страница: 42 / 311

VIRB® ULTRA 30 41
EN
You can erase all photos, videos, and other data on the
memory card installed in your device.
From the main menu, select > System > Format
Card > Yes .
Display Settings
From the main menu, select Display .
Viewfinder : Sets the viewfinder mode (Viewfinder
Modes, page 41) .
Screen Timeout : Sets the length of time before the
screen turns off and enters standby mode.
Lock Screen : Locks the touchscreen to prevent inadver-
tent screen touches.
Brightness : Adjusts the screen brightness.
Viewfinder Modes
You can use the viewfinder to set up shots, view status
information, or view data from the device sensors.
Sensor information appears as a grouping of data fields,
charts, or graphs, and provides real-time and historical
views of the sensor data recorded on the device.
From the main menu, select Display > Viewfinder >
Mode .
Preview : Displays the camera viewfinder and provides
additional options.
Grid : Turns on grid lines to frame and balance your shot
in preview mode.
Overexposure : Highlights overexposed areas of the shot
in preview mode.
Speed : Displays the current speed, average speed, and
maximum speed.
NOTE: All minimum, maximum, and average data
resets after you turn off the device.
Distance : Displays the total distance traveled.
Elevation : Displays the current elevation, elevation
graph, and time scale.
Device Care
NOTICE
Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 41 2016/8/9 上午 10:42:03