Installing the Device in a Dodge ProMaster
1 Place the upper bracket on the dock
, aligning the holes in the bracket with the holes on the top of the
dock.
2 Using the included screws , secure the bracket to the top of the dock.
The recommended torque you should apply to the screws is 5.0 to 6.0 lbf-in. (0.56 to 0.68 N-m).
3 Repeat this procedure for the side brackets .
4 Attach the clip-on nuts to the bottom edge of the dashboard, and attach the chassis bracket to the
clip-on nuts using the included screws.
5 Attach the upper chassis bracket to the dashboard using the existing screws in the vehicle dashboard.
6 Attach the dock to the dashboard using the included screws.
7 Attach the included bezel to the front of the dock.
8 If necessary, install all remaining dashboard components.
14