VHF 300 Series Owner’s Manual
Basic Operation
3. Press the
PTT
key on the handset to sound the horn. The horn will stop when you
release the
PTT
key.
4. Turn the
Channel
knob to adjust the volume of the horn.
5. Select
EXIT
to return to the Home screen.
Adjusting the Sound Frequency of the Foghorn
You can increase or decrease the sound frequency of the foghorn. The pitch of the tone
will rise with an increase in the frequency, and will fall with a decrease in frequency. The
minimum setting is 200 Hz and the maximum setting is 850 Hz. The default setting is 350
Hz. Regulations dictate the correct frequency of foghorns. Typically, these regulations
correlate the required foghorn frequency with the size of the vessel.
1. Select the
MENU
key.
2. Select
SYSTEM
>
FOG FREQUENCY
.
3. Use the
Channel
knob to adjust the frequency in 50 Hz increments.
4. Select
ACCEPT
to save your changes and return to the Home screen. Select
CANCEL
to disregard the changes and return to the previous screen.
Listening to NOAA Weather Broadcasts and Enabling
Weather Alerts
NOTE:
This functionality is not available with the VHF 300i or VHF 300i AIS. NOAA
broadcasts on the WX channels are only available in the USA and certain regions in Canada.
There are 10 WX (weather) channels that are pre-programmed into your radio to monitor
weather broadcasts from the National Oceanic and Atmospheric Organization (NOAA). WX
channels are listen-only channels.
These broadcasts are in a continuous loop and are updated regularly. Because the NOAA
weather centers broadcasting the information are regional, the weather information will be
relevant to your broadcast area.
Accessing WX (Weather) Mode
1. While viewing the Home screen, press the
Channel
knob. “WX” is displayed to indicate
that you are listening to WX frequencies.
2. Turn the
Channel
knob to change the channel.
3. Select
EXIT
to return to the Home screen. The radio returns to the channel you were
listening to before you entered WX mode.
