Mounting the Microphone Hanger
NOTICE
If you are mounting the bracket on fiberglass with screws, it is recommended to use a countersink bit to drill a
clearance counterbore through only the top gel-coat layer. This will help to avoid cracking in the gel-coat layer
when the screws are tightened.
You can mount the microphone hanger in a convenient location near the radio.
1 Select a mounting location for the microphone within reach of the microphone cable.
2 Using the microphone hanger as a template, mark the pilot holes.
3 Drill the mounting holes using a 3 mm (
1
/
8
in.) drill bit.
4 Secure the microphone hanger to the mounting surface using the included screws .
4
