Garmin Varia eRTL615, Руководство пользователя

Страница: 8 / 22

5 Using a 4 mm hex key, tighten the M5 screw to 3 N-m (27 lbf-in.).
6 If you are not using a friction flange adapter, align the holes in the rear rack of your bike with the holes on the
back of your Varia eRTL615 tail light.
7 Using a 3 mm hex key, tighten the two M4 screws to 1 N-m (9 lbf-in.).
8 Connect the cable to your bike.
Consult the owner's manual for your bike for additional information on connecting devices.
9 Secure the cable so that it does not interfere with any moving parts of the bike.
Device Overview
Device button
Press to change device and light modes.
Hold for 1 second to turn the device on and enter active mode.
Hold for 4 seconds to enter pairing mode (
Pairing the Varia eRTL615 with Your Phone,
page 8 ).
When the device is in sleep mode, hold for 2 seconds to wake the device.
Hold for 2 seconds to turn the tail light off.
Hold for 10 seconds to reset the device.
Device status
LED
Changes color based on the pairing status and device mode status ( Varia eRTL615 Status
LED, page 5 ).
4 Introduction