Press and release Deckmount (on/off) button, usually found on stern of boat close
to the out board. The deckmount light and standby LED on the hand held will both
blink, the autopilot system is in a start-up mode and no operations are available for 30
seconds.
When the STBY LED turns solid press the bull’s eye and release to engage the
autopilot.
When the AUTO LED is solid the autopilot is engaged.
Press and hold the left straight arrow button to make a
port
turn, AUTO LED will
start blinking, to stop turn release button, AUTO LED will revert to solid when a
new heading is captured. Or momentarily press button to make a 1 degree heading
change. (Momentarily pressing the button twice = 2 degree change, three times = 3
degree change, etc.)
Press and hold the right straight arrow button to make a
starboard
turn, AUTO LED
will start blinking, to stop turn release button, AUTO LED will revert to solid when
a new heading is captured. Or momentarily press button to make a 1 degree heading
change. (Momentarily pressing the button twice = 2 degree change, three times = 3
degree change, etc.)
STBY LED
AUTO LED
Bull’s eye
2
Remember safe and prudent operation of the
vessel is your responsibility as Captain.
How To Turn the Autopilot on:
How to engage Autopilot:
