This procedure contains instructions for the
fenix. If you have another compatible device,
see your owner's manual.
1
Move 10 m away from other ANT-sensors.
2
Turn on the device.
3
Bring the device within range (9.8 ft. or 3 m)
of the sensor.
4
Select the Orange key.
5
Select Setup >
ANT
Sensor > Tempe >
New Search.
When the tempe is paired, the fenix displays
temperature data from the tempe instead of
using the internal temperature sensor. For
more information, see the
fenix Owner's
Manual.
Tips
Place the sensor where it is exposed to
ambient air.
Avoid locations where sunlight, body heat, or
other conflicting hot/cold sources could affect
the sensor.
Specifications
Battery type
User-replaceable CR2032, 3
volts
Battery life
Up to 1 year
Water resistance
Water resistant to 32.9 ft.
(10 m)
Operating
From -4°F to 140°F
temperature range (from -20°C to 60°C)
Radio frequency/
2.4 GHz ANT+ wireless
protocol
communications protocol
4
FCC Compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class
B
digital device,
pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and may
cause harmful interference to radio
communications if not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in
a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and the receiver.
Connect the equipment into an outlet that is
on a different circuit from the GPS unit.
Consult the dealer or an experienced radio/
TV technician for help.
This product does not contain any user-
serviceable parts. Repairs should only be made by
an authorized service center. Unauthorized
repairs or modifications could result in permanent
damage to the equipment, and void your
warranty
5
