Garmin STRIKER PLUS ICE FISHING, Руководство пользователя, Страница: 5 / 8

Customizing the STRIKER Plus for Ice
Fishing
Adjusting the Backlight Brightness
From any screen, press repeatedly to scroll through the
backlight brightness levels.
When you are on the ice, a 100% level is recommended.
When in a shelter, a 40% to 60% level is recommenced.
TIP: A lower backlight brightness level helps extend the
battery life.
Adding the Flasher to the Home Screen
The flasher shows sonar information on a circular depth scale,
indicating what is beneath your transducer. It is organized as a
ring that starts at the top and progresses clockwise. Depth is
indicated by the scale inside the ring. Sonar information flashes
on the ring when it is received at the depth indicated. The
flasher colors indicate different strengths of the sonar return.
The default color scheme follows a traditional sonar color
palette, in which red indicates the strongest return, orange
indicates a strong return, yellow indicates a weaker return, and
light blue indicates the weakest return.
Depth at your present location
Depth scale
1
From the Home screen, select Customize Home > Add >
Flasher .
2 Use the arrow keys to select a location.
3 Select > .
Editing the Overlay Numbers on the Flasher Page
You can add and change the overlay numbers on each page.
1
From the Flasher page, select > Overlay Numbers >
Hide to show the overlay numbers.
2
Select Edit Layout > Water Temp. .
TIP: The Water Temp. field will always be blank when ice
fishing. If necessary, you can replace this field with a different
field when you are ice fishing.
3
Select another item to display.
4 Repeat the previous two steps for all items you want to
change.
Optimizing the Sonar Screen for Ice
Fishing
Selecting the Transducer Type
If you are connecting a transducer that was not included with the
device, you may need to set the transducer type to make the
sonar function properly. Before connecting the transducer, you
should select the transducer type. The transducer name should
be listed on the label on the transducer cable, near the
connector.
This device is compatible with a range of accessory transducers,
including the Garmin ClearVü
™
transducers, which are available
at garmin.com/transducers .
1
Select Settings > My Vessel > Transducer Type .
2
Select an option:
• If you have a Dual Beam-IF ice fishing transducer or a
200/77 kHz dual-beam transducer, select Dual Beam
(200/77 kHz) .
• If you have a GT8HW-IF ice fishing transducer or a 200/50
kHz dual-frequency transducer, select Dual Frequency
(200/50 kHz)
• If you have another type of transducer, select it from the
list.
Turning on the A-Scope
The a-scope is a vertical flasher along the right side of the full-
screen sonar view. This feature expands the most recently
received sonar data so that it is easier to see. It can also be
helpful for detecting fish that are close to the bottom.
NOTE: This feature is not available on all sonar screens.
From the full screen page, select > Sonar Setup >
Appearance > A-Scope .
A-Scope
Diameter of the sonar cone at the present depth
Setting Up and Using Split-Zoom View
On the split-zoom page, you can see a full-view graph of sonar
readings on the right side of the screen with a zoom window,
and a magnified view of that zoom window on the left side of the
screen.
Zoomed depth scale
Zoom window
Depth range
1 From the Traditional view, select > Zoom > Split Zoom
> Off to turn on split zoom.
Customizing the STRIKER Plus for Ice Fishing 1