Garmin RV-BBT600 Series, Руководство пользователя, Страница: 22 / 26

5
Click Add Device .
6
Follow the on-screen instructions to add your device to the
Garmin Express software.
When setup is complete, the Garmin Express software
searches for software updates.
7
Select an option:
• To install all available updates, click
Install All .
• To install a single update, click View Details and select an
update.
The Garmin Express software downloads the updates onto the
USB flash drive.
After you finish downloading the software updates onto the
USB flash drive, you should install the updates onto the dock
( Installing Downloaded Updates onto the RV HUB Dock ,
page 18 ).
Installing Downloaded Updates onto the RV HUB Dock
Before you can install updates onto the dock, you must
download them onto a prepared USB flash drive using Garmin
Express ( Downloading Software Updates to the Prepared USB
Flash Drive , page 17 ).
1
Turn on the vehicle, and place the RV HUB remote in the
RV HUB dock.
The dock must be receiving power to install the updates.
WARNING
Do not attempt to update the software while operating the
vehicle.
2
Plug the USB flash drive into the USB port in your vehicle or
on the back of the dock.
3 Select Music > > Settings > Update .
4 Select the dock device name.
The default name is RV-BBT60X.
The dock installs the software updates from the USB flash
drive.
NOTICE
Do not turn off the vehicle until the update process is complete.
The dock restarts during the update process, and the remote
disconnects from the dock. When the remote reconnects to the
dock and appears in the status bar, the update is complete.
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Do not expose the device to water.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1
Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2
If necessary, lightly dampen the cloth with water.
3
If using a dampened cloth, turn off the device and disconnect
the device from power.
4
Gently wipe the screen with the cloth.
Device Information
Charging the RV HUB Remote Battery
NOTE: This Class III product shall be powered by an LPS power
supply.
You can charge the RV HUB remote battery using any of these
methods.
• Place the remote in the dock, and turn on the vehicle.
The dock charges the remote. The battery icon in the status
bar indicates the charge level. It takes approximately two
hours to fully charge the battery.
• Attach the remote to the optional automobile mount, and
connect the mount to vehicle power using the vehicle power
cable included with the automobile mount.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter
suitable for home or office use from a Garmin dealer or
garmin.com . The device may charge slowly when connected
to a third-party adapter.
RV-BBT600 Dock Specifications
Specification Value
Input voltage From 10.8 to 16 Vdc
Current (max.) 15 A
Current (muted) Less than 350 mA
Current (standby) Less than 5 mA
Output power (to speakers) 45 W x 4 channels (max.)
Output power (to remote) 5 V, 2 A
Output power (USB) 5 V, 2.1 A and 5 V, 500 mA
Operating temperature range From -15° to 70°C (from 5° to 158°F)
Wireless protocols
2.4 GHz Bluetooth wireless technology
2.4 GHz Wi
‑
Fi
®
technology
On-board, Class SB Amplifier
Output music power per channel 45 W max. x 4 channels at 4 ohms
per channel
Total output music power 180 W max.
Tuner Europe and
Australasia USA Japan
FM radio
frequency range 87.5 to 108 MHz 87.5 to
107.9 MHz 76 to 95 MHz
FM frequency
step 50 kHz 200 kHz 50 kHz
AM radio
frequency range 522 to 1620 kHz 530 to
1710 kHz 522 to
1620 kHz
AM frequency
step 9 kHz 10 kHz 9 kHz
RV-BBT600 Series Remote Specifications
Operating
temperature range From -20° to 60°C (from -4° to 140°F)
Charging
temperature range
(vehicle power) From 0° to 40°C (from 32° to 104°F)
18 Device Information