© 2019 Garmin Ltd. or its subsidiaries
support.garmin.com
Страница 1: ...hook and loop straps through the narrow slots beside the battery compartment 4 If you are installing a Panoptix LiveScope sonar module using the eight included 21 mm screws split washers and flat wash...
Страница 2: ...e cradle and tighten the knobs The rubber washers enable you to adjust the viewing angle without adjusting the knobs 9 Place the battery not included into the battery compartment under the handle 10 P...
Страница 3: ...leads to the gray bare wire connectors on the power cable 4 If you are connecting a Panoptix LiveScope sonar module connect the 2 pin power cable to the sonar module 5 Slide the red spade connector on...
Страница 4: ...2019 Garmin Ltd or its subsidiaries support garmin com...
