Garmin MARQ DRIVER, Быстрый старт

Страница: 22 / 50

18 MARQ Driver
EN
3 Close the latch over the watch pin.
NOTE: Make sure the strap or
bracelet is secure. There should be
a small gap ① between the latch
and the strap or bracelet.
Tips for Adjusting the Hybrid Metal
Bracelet
Garmin recommends you take your
watch to a jeweler or other professional
to adjust the length of the metal
bracelet.
y
Use a pin removal tool or spring bar
removal tool to adjust the bracelet.
y
Remove an equal number of links
from both sides of the clasp.
This helps your watch stay centered
on your wrist.
y
Add +1 mm links for micro
adjustments.
For a balanced look, you should
add +1 mm links starting from the
clasp on alternating sides, instead
of adding links to the ends of the
bracelet. The +1 mm side of the
links should face the inside of your
wrist.
MARQ Driver 英日[100x105mm]-9.indd 18 2019/4/24 下午 03:41:06