Garmin inReach Mini, Руководство пользователя, Страница: 8 / 12

2
Select Change Location .
3
Select a location.
Requesting a Weather Forecast
1 From the Weather page, select OK .
2 Select Update .
3
If necessary, select a forecast type.
NOTE: For best results, you should request a marine
forecast for a location away from shore and over a large body
of water.
Deleting a Weather Location
You must set the weather location before you can delete it
( Setting the Weather Location , page 3 ).
1
From the Weather page, select OK .
2
Select Remove .
Remote Control
You can access some inReach Mini features using another
compatible device with ANT+
®
wireless technology, such as the
fēnix
®
watch. You can use remote control to view incoming
messages, send preset messages, start and stop tracking, and
initiate or cancel an SOS.
NOTE: You must enable ANT+ before pairing your device
( ANT+ Sensor Settings , page 4 ).
Data Use and History
Viewing Data Use
You can view the number of messages, preset messages, and
track points sent during the current billing cycle. You can also
view the details of your current data plan and check for data
plan updates. The data use counter resets automatically at the
beginning of each billing cycle.
From the main menu, select Utilities > Data Use .
Resetting the Data Use Counter
If you are a professional customer, you can reset the data use
counter to monitor your usage.
From the main menu, select Utilities > Data Use > Reset
Counter .
Customizing the Device
Display Settings
From the main menu, select Setup > Display .
Brightness : Sets the backlight brightness.
Timeout : Sets the length of time before the backlight turns off.
Tracking Settings
From the main menu, select Setup > Tracking .
Send Interval : Sets the frequency at which the device records a
track point and transmits it over the satellite network when
you are moving.
Log Interval : Sets the frequency at which the device logs your
location and updates the track line in memory.
Auto Track : Sets the device to start tracking when you turn on
the device.
Extended Tracking : Sets the device to enter sleep mode
between track points to maximize battery life. Sleep mode
disables Bluetooth wireless technology, detailed track lines,
and message checking.
Stationary Interval : Sets the frequency at which the device
records a track point and transmits it over the satellite
network when you are not moving. This setting is only
available for professional customers.
Burst Tracking : When tracking, sets the device to create and
send a detailed track line to provide the best approximation of
your location. You can select the amount of data to use, and
the device will create as many track points as possible. This
setting is only available for professional customers.
Bluetooth Settings
From the main menu, select Setup > Bluetooth .
Enabled : Enables Bluetooth wireless technology.
Pair Device : Connects your device with a compatible Bluetooth
enabled mobile device. This setting allows you to use
Bluetooth connected features using the Earthmate app.
Forget Device : Removes the connected device from the list of
mobile devices to connect to. This option is available only
after the device has paired.
Pair Again : Restarts the pairing process. This option is
available only after the device has paired.
ANT+ Sensor Settings
From the main menu, select Setup > ANT+ .
Enabled : Turns ANT+ on or off.
Messages Settings
From the main menu, select Setup > Messages .
Ring Until Read : Sets the device to ring until you read a new
message. This feature is helpful if you are in a noisy
environment.
Adaptive Mail Check : When this setting is enabled, the device
listens more frequently for a reply to a sent message for ten
minutes. If the recipient replies quickly, you can receive the
reply before the next scheduled listen interval. This setting is
only available for professional customers.
Sounds Settings
From the main menu, select Setup > Sounds .
Mute All : Mutes all device tones.
Volume : Sets the device volume level.
Message Received : Sets the tone that sounds when you
receive a message.
Message Sent : Sets the tone that sounds when the you send a
message.
Critical Alert : Sets the tone that sounds when the device
announces a critical alert.
Power Off : Sets the tone that sounds when you turn off the
device.
Time Settings
From the main menu, select Setup > Time .
Time Format : Sets the device to show time in a 12-hour or 24-
hour format.
Time Zone : Sets the time zone for the device.
Daylight Saving : Sets the device to use daylight saving time.
This option is not available when Time Zone is set to
Automatic.
Units Settings
NOTE: You should not change the position-coordinate format or
the map datum coordinate system unless you are using a map
or chart that specifies a different position format.
From the main menu, select
Setup > Units .
4 Remote Control