GWS 10 Installation Instructions
EN
Configuring the GWS 10 if the Filter and Offset Selections Are Not Shown
Refer to your Garmin Chartplotter or marine instrument owner’s manual for instructions regarding configuring NMEA 2000 devices.
To configure the orientation:
1. Select Generic Configuration to specify data for the filter and offset settings.
2. Enter the following command:
“ANGLEOFFSET=”
3. Follow the command with a number between 0 and 359, in degrees (for example: ANGLEOFFSET=180).
To configure the wind angle filter:
1. Select Generic Configuration to specify data for the filter and offset settings.
2. Enter the following command:
“ANGLEFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
automatic setting (for example: ANGLEFILTER=12).
To configure the wind speed filter:
1. Select Generic Configuration to specify data for the filter and offset settings.
2. Enter the following command:
“SPEEDFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting (for example: SPEEDFILTER=215).
NMEA 2000 PGN Information
Use the tables to determine the approved NMEA 2000 PGN information that can be received and transmitted by a GWS 10 when
communicating with a NMEA 2000-compliant device.
Transmit
Receive
059392
ISO Acknowledgment
059392
ISO Acknowledgment
060928
ISO Address Claim
059904
ISO Request
126208
NMEA - Command/Request/
Acknowledge Group Function
060928
ISO Address Claim
126464
Transmit/Receive PGN List Group
Function
126208
NMEA - Command/Request/
Acknowledge Group Function
126996
Product Information
The GWS 10 is NMEA 2000
certified
130306
Wind Data
130312
Temperature
130314
Actual Pressure
Specifications
Physical
NOTE:
The width of this sensor varies with the positioning of the
wind vane.
unit Dimensions:
W × H × D: 19
11
/
16
–22
5
/
8
× 11
1
/
32
× 5
1
/
2
in.
(500–575 × 280 × 140 mm)
Weight:
0.6 lb. (0.275 kg)
Cable:
Attached NMEA 2000 cable length is 18 in. (46 cm)
Temperature Range:
From 5°F to 158°F (from -15°C to 70°C)
Case Material:
Housing and Base: PC/ABS
Wind vane and Anemometer: Polypropylene
Tubing: 6063 Aluminum
Shafts:
304 SS
Power
power input Source:
9–16 Vdc via NMEA 2000
NMEa 2000 Load Equivalency Number (LEN):
2 (100 mA)
