To mount the GPS antenna inside your vehicle:
1.
Clean your dashboard or other surface.
2.
Peel the backing of
f of the adhesive on the bottom of the
metal plate.
3.
Press
the
metal
plate
down
firmly
on
your
dashboard
or
other mounting surface.
You can bend the metal plate to
conform to a curved surface, if necessary
.
4.
Place the GPS antenna on top of the metal plate.
Connect the ignition wires to a power
source that can be turned on and of
f
with the ignition key
. If you connect the
ignition wire to a power source with a
constant voltage supply
, such as battery
wires, the vehicle’
s battery may die.
Do not connect the yellow wire
directly to the vehicle battery
.
Doing so may cause the wire
insulation to fail and may pose
a risk of short circuit and electric
shock.
Optional accessory:
XM Smart
Antenna or
FM
traffic
receiver
Composite video
mode switch
GVN 53
SD card
GPS antenna
Better (trunk
of vehicle)
Good (inside car
on dashboard)
Installing the GPS antenna
Best (roof of
vehicle)
Yellow RCA
White RCA
Red RCA
Blue
Gray (Rx In)
W
ARNING
Composite V
ideo
Audio L
Audio R
Audio Mute
Purple (Tx Out)
Orange (Digital Gnd)
Black
(GND)
To vehicle chassis
Red
(ACC)
To ignition (12 V)
2
A
To battery (12 V)
Car fuse box
Ignition key switch
Car fuse box
(main fuse)
CAUTION
2
A
Yellow
(BA
TT)
White (Speaker -)
Green (S)
Can be connected
to optional speaker
Blue wire is
optional. Gray
,
purple, and or
-
ange wires will not
be connected for
most applications.
See the Owner's
Manual for more
information.
Optional Speaker
