Garmin GTX GTX 330D, Руководство по обслуживанию

Страница: 73 / 133

190-00734-11 GTX 33X and GTX 3X5 ADS-B Maintenance Manual
Rev. 6 Page 6-4
6.3 GTX 3X5
This section contains parts, procedures, and requirements for assembly, removal, and reinstallation of
GTX 3X5 equipment installed under STC SA01714WI. After removal and reinstallation, the GTX 3X5
return to service procedures must be performed in accordance with section 9.
Table 6-1 GTX 3X5 Connector Kit Hardware
Figure 6-3 GTX 3X5 Connector Kits
Refer to table 6-2 for the list of back plate items for the standard/G1000 mounting assembly. Refer to
figure 6-4 and figure 6-5 for the back plate assembly.
Table 6-2 Standard/G1000 Mount Back Plate Hardware
Description P/N Qty
Connector, hi-dense, D-sub, mil crimp 62 ckt 330-00185-62 1
Sub-assembly, backshell with hardware, 37/62 pin 011-00950-03 1
Sub-assembly, ground adapter, shell 4&5 011-01169-01 1
Screw, 4-40 x .250, FLHP 100, SS/P, nylon 211-63234-06 2 ea connector
Connector, hi-dense, D-sub, mil crimp, 15 ckt 330-00185-15 1
Sub-assembly, backshell with hardware, 9/15 pin 011-00950-00 1
Sub-assembly, ground adapter, shell 1-3 011-01169-00 1
Item Description P/N Qty
1 DCP, connector plate, GTX 3X5, w/secondaries 125-00307-10 1
2 Connector, male/female special, BNC 330-00053-01 1
3 Washer, shoulder, GNC 400 212-00022-00 2
4 Connector, male/female, special, BNC/TNC 330-00053-02 1
5 Screw, 4-40 X .250, PHP, SS/P, nylon 211-60234-08 4
GTX 3X5
P3251
GTX 345/345R Only
P3252