190-01553-01 Rev. G
Garmin GTR 200/200B Pilot’s Guide
4
GTR 200/200B
BASIC OPERATION
POWER-UP
Turn the GTR 200/200B on by either turning the
Power/Volume/Squelch
knob clockwise or, if installed, turning on the master switch that powers the
radios.
COM RADIO
New frequencies are first selected as a Standby frequency and then
toggled to the Active side with the
Frequency Transfer Key
. While viewing
the Standby frequency display, use the
LARGE
and
SMALL
knobs on the
right side of the GTR 200/200B to select the desired frequency. Turn the
LARGE
and
SMALL
knobs, clockwise to increase and counterclockwise to
decrease frequency values. Standby frequency selections is not inhibited
during transmit.
When connected to a device that provides nearby frequency information,
nearby station identifiers will be shown for the selected frequency.
Identifier and Type Shown
for the Selected Frequency
COM Frequency Selection
Selecting a COM Frequency:
1)
Turn the
LARGE
Knob to change the value in one MHz increments.
2)
Turn the
SMALL
Knob to change the value in 25 kHz increments.
3)
Press the
Frequency Transfer
Key
to toggle the Standby frequency to
the Active frequency.
