background image

190-01553-01 Rev. G

Garmin GTR 200/200B Pilot’s Guide

5

   GTR 200/200B

Adjusting Volume:

   

Turn the 

Power/Volume/Squelch

 knob clockwise to increase volume 

and counter-clockwise to decrease volume.

STANDBY COM FREQUENCY MONITORING

The Frequency Monitoring function allows you to monitor the Standby 

frequency for activity, while listening to the Active frequency.  

When the 

Active frequency receives a signal, the unit will switch automatically to the Active 
frequency. The Active frequency quality is not affected.

Monitoring the Standby COM Frequency:

   

Press the 

MON

 Key, to listen to the Standby frequency.  A small ‘M

’ is 

displayed above the ‘STB’ to the left of the Standby frequency.  Press the 

MON

 Key again to stop monitoring.  

Standby COM Frequency Monitor Annunciation

Monitor 

Annunciation

Standby 

Frequency Being 

Monitored

COM FREQUENCY STORAGE

Any frequency may be saved into the COM User Frequency Group. The 

COM User Frequency database can hold up to 20 frequencies.  Press the 

USR

 Softkey or Press the

 SMALL

 Knob to access the frequency groups. 

Saving a COM Frequency:

1) 

Press the 

SMALL 

Knob and turn the 

LARGE

 Knob to highlight 

USER

.

Or

:

  Press the

 USR 

Softkey if configured.

Or:

 Press 

MENU

, and turn the 

LARGE

 Knob to highlight 

USER FREQ

.  

Press the 

SMALL

 Knob to select. Skip to step 3.

Содержание GTR 200



































Отзывы: