8-24
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. Q
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
8.9
Import User Waypoints (Datacard)
NOTE
: This feature is available in software v5.10 and later.
The GTN can import user generated waypoints from a file on the datacard.
The created waypoints will be at the latitude and longitude specified in the file
with the specified name and comment. This function overwrites any existing
user waypoints with the same name.
When a user waypoint file is on the datacard, a key will be available on the
Waypoint Info page for importing user waypoints.
1. Insert a datacard with the User waypoints into the GTN.
2. From the Waypoint Info page, touch the
Import Waypoints
key.
3. Touch
OK
to acknowledge the pop-up to import all of the user
waypoints in the file.
Figure 8-30 Start User Waypoint Import
4. The pilot is informed of the status of the user waypoint import
via one of the following system messages.