14-7
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Utilities
14.1.3 Vertical Speed (VS) Profile
This value sets the vertical speed.
1. While viewing the VCALC page, touch the
VS Profile
key.
Numeric
Keypad
Selected
Vertical
Speed
Backspace
Key
Touch Enter or
Press Small Knob
to Save Value
Figure 14-7 Select VCALC Vertical Speed
2. Use the numeric keypad to select the desired Vertical Speed
and then touch the
Enter
key.
14.1.4 Target Offset
The Target Offset is a pilot-selected distance value that represents the
geographical location where you wish to arrive at the target altitude. This
distance is measured from the Target Waypoint and, in a separate data field on
the VCALC page, designated as either before or after the Target Waypoint.
1. While viewing the VCALC page, touch the
Offset
key.
Selected
Target
Offset
Backspace
Key
Touch Enter
or Press Small
Knob to Save
Number
Numeric
Keypad
Figure 14-8 Select VCALC Target Offset
2. Use the numeric keypad to select the desired Target Offset and
then touch the
Enter
key.
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...