8-37
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Map
8.3.3 Graphically Edit Flight Plan Mode
The Edit Flight Plan Mode allows making quick changes to the active flight
plan directly on the display. The process is simply touching the display to start
Map Pan Mode, touching the
Graphically Edit FPL
key, dragging the desired
leg to a new waypoint or airway, and touching the
Done
key. When graphically
editing the active flight plan leg, the active leg course and TO Waypoint will be
added to the flight plan as a Direct-To. At any point, a step may be removed by
touching the
Undo
key or the whole process ended by touching the
Cancel
key.
The
Undo
key will remove up to nine steps.
NOTE:
It is not possible to graphically add an intermediate waypoint
between the current position and a direct-to waypoint unless that waypoint
is in the flight plan. Garmin recommends deleting any flight plan prior to
graphically editing a Direct-To waypoint.
8.3.3.1
Adding a Waypoint Within an Existing Flight Plan
1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the
Graphically Edit FPL
key.
Current Active
Flight Plan
Touch to Return to
Map Display
Map Pointer where
Display was Touched
Touch to Change
Flight Plan
Figure 8-42 Edit Flight Plan Mode
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...
