Garmin GSA 8X, Руководство по установке

Страница: 38 / 80

Page 3-12 GSA 8X/GSM 85(A) Installation Manual
Revision R 190-00303-72
3.3.7.3 Continuous Travel Capstan
1) Insert swaged ball end of the cable (233-20002-00) into the bottom end slot of the fixture capstan
(Figure 3-16). Wrap the cable around the capstan two and one half times, and then across to the
bottom slot of the unit capstan (Figure 3-17).
Figure 3-16. Cable end inserted in bottom slot
Figure 3-17. Cable wrapped 2.5 times, going across to unit capstan lower slot
2) Wrap the cable half of one turn around the unit capstan and then over to the middle slot of the idler
pulley (Figure 3-18). Route the cable around the idler pulley one half turn and then back to the unit
capstan upper slot (Figure 3-19). Wrap the cable one half turn around the upper slot of the unit
capstan and then across to the lowest empty groove of the fixture capstan (Figure 3-20).