Selecting an Approach
CAUTION:
The approaches provided in the Jeppesen database
are for monitoring purposes only. The GPSMAP 196 is not an
IFR-approved instrument and should not be used as a primary
source of navigation guidance in instrument conditions.
When you select an approach, it replaces the destination airport with
the sequence of waypoints for the selected approach. Keep in mind
that the airport must have a published approach (GPS, RNAV, VOR,
NDB, localizer, or ILS) and only the final course segment (usually
from final approach fix to missed approach point) of the published
approach is available in the GPSMAP 196.
NOTE:
When using a route, the selected approach for the
destination airport overrides your current route. The original
route is saved in the Route tab.
You can select an approach several ways:
• Press the
Direct To
and press
MENU
on the Goto Page,
as described in the steps to the right.
• From the Active Goto (or Active Route) Page, press
MENU
.
• From the Airport Details Page, select the Approach tab.
To select an approach for the destination airport:
1. Press the
Direct To
to show the Goto Page. Select the
destination you want to travel to.
2. Press
MENU
to open the options menu. Highlight
Select
Approach
, and press
ENTER
.
3. Use the
ROCKER
to select the approach from the window,
and press
ENTER
. A Vectors? window appears. See the
following page for more information on vectors.
Selecting an Approach
4. Use the
ROCKER
to select
Yes
or
No
, and press
ENTER
.
The GPSMAP 196 removes the destination airport from the
Goto and replaces it with the approach waypoints.
22
GPSMAP 196 Pilot’s Guide
B
ASIC
O
PERATION
IN
A
VIATION
M
ODE
>
S
ELECTING
AN
A
PPROACH
Содержание GPSMAP GPSMAP 196
Страница 1: ...GPSMAP 196 portable aviation receiver pilot s guide ...
Страница 129: ......
Страница 130: ......
Страница 131: ......