background image

• To remove all presets, select 

Remove All Presets

.

SiriusXM Satellite Radio

When you have a FUSION-Link

 capable stereo and SiriusXM 

Connect Tuner installed and connected to the chartplotter, you 

may have access to SiriusXM satellite radio, depending on your 

subscription.

Locating a SiriusXM Radio ID

Before you can activate your SiriusXM subscription, you must 

have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the 

SiriusXM Connect Tuner, on the back of its packaging, or by 

tuning your chartplotter to channel 0.

1

Select 

Media

 > 

Source

 > 

SiriusXM

.

2

Tune to channel 0.
The SiriusXM radio ID does not include the letters I, O, S, or 

F.

Activating a SiriusXM Subscription

Before you can activate the SiriusXM subscription, you must 

have the Radio ID (

Locating a SiriusXM Radio ID

, page 36

).

1

With the SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not, check 

the SiriusXM Connect Tuner and antenna installation and 

connections, and try again.

2

Tune to channel 0 to locate the Radio ID.

3

Contact SiriusXM listener care by phone at (866) 635-2349 or 

go to 

www.siriusxm.com/activatenow

 to subscribe in the 

United States. Contact SiriusXM by phone at (877) 438-9677 

or go to 

www.siriusxm.ca/activatexm

 to subscribe in Canada.

4

Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but 

can take up to an hour. For the SiriusXM Connect Tuner to 

receive the activation message, it must be turned on and 

receiving the SiriusXM signal.

5

If the service is not activated within the hour, go to 

http://care.siriusxm.com/refresh

 or contact SiriusXM by phone 

at 1-855-MYREFRESH (697-3373).

Customizing the Channel Guide

SiriusXM radio channels are grouped in categories. You can 

select the categories of channels that appear in the channel 

guide.

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Media

 > 

Browse

 > 

Channel

.

• If the media device is a GXM

 antenna, select 

Media

 > 

Category

.

Saving a SiriusXM Channel to the Presets List

You can save your favorite channels to the presets list.

1

Select 

Media

.

2

Select the channel to save as a preset.

3

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Browse

 > 

Presets

.

• If the media device is a GXM antenna, select 

Menu

 > 

Presets

 > 

Add Current Channel

.

Unlocking SiriusXM Parental Controls

1

From the media screen, select 

Browse

 > 

Parental

 > 

Unlock

.

2

Enter your passcode.
The default passcode is 0000.

Setting Parental Controls on SiriusXM Radio Channels

Before you can set parental controls, the parental controls must 

be unlocked.
The parental control feature allows you to limit access to any 

SiriusXM channels, including those with mature content. When 

enabled, the parental control feature requires you to enter a 

passcode to tune to the locked channels.

Select 

Browse

 > 

Parental

 > 

Lock/Unlock

.

A list of channels appears. A checkmark indicates a locked 

channel.

NOTE: 

When you view the channels after setting parental 

controls, the display changes:

 indicates a locked channel.

 indicates an unlocked channel.

Changing a Parental Passcode on a SiriusXM Radio

Before you can change the passcode, the parental controls must 

be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Change 

PIN

.

2

Enter your passcode and select 

Done

.

3

Enter a new passcode.

4

Confirm the new passcode.

Restoring Default Parental Control Settings Values

This process deletes all the settings information you have 

entered. When you restore the parental control settings to their 

default values, the passcode value is reset to 0000.

1

From the media menu, select 

Installation

 > 

Factory 

Defaults

.

2

Select 

Yes

.

Clearing All Locked Channels on a SiriusXM Radio

Before you can clear all locked channels, the parental controls 

must be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Clear 

All Locked

.

2

Enter your passcode.

Setting the Device Name

1

From the media screen, select 

Menu

 > 

Installation

 > 

Set 

Device Name

.

2

Enter a device name.

3

Select 

Select

 or 

Done

.

Updating the Media Player Software

You can update the software on compatible connected stereos 

and accessories.

1

Go to 

www.fusionentertainment.com/marine

, and download 

the software update onto a USB flash drive.
Software updates and instructions are available on your 

device product page.

2

Insert the USB flash drive into the USB port of the stereo.

3

On the chartplotter media screen, select 

Menu

 > 

Installation 

Update Software

.

4

Select the item to update.

SiriusXM Weather

 WARNING

The weather information provided through this product is subject 

to service interruptions and may contain errors, inaccuracies, or 

outdated information, and consequently should not be relied 

upon exclusively. Always use common sense while navigating, 

and check alternate weather information sources prior to making 

36

SiriusXM Weather

Содержание GPSMAP 902 series





























































Отзывы: