Garmin GPSMAP 702 series, Руководство пользователя

Страница: 46 / 83

From the media screen, select Menu > Installation > Alpha
Search .
Setting a Song to Repeat
1
While playing a song, select Menu > Repeat .
2
If necessary, select Single .
Setting All Songs to Repeat
From the media screen, select Menu > Repeat > All .
Setting Songs to Shuffle
1 From the media screen, select Menu > Shuffle .
2 If necessary, select an option.
Adjusting the Volume
Muting the Media Volume
1
From the media screen, select .
2
If necessary, select Select .
Enabling and Disabling Zones
If you have wired your vessel's speakers into zones, you can
disable unused zones.
1
From the media screen, select Menu > Audio Levels >
Enable/Disable Zones .
2 Select a zone.
VHF Radio
Scanning VHF Channels
Before you can scan VHF channels, you must set the source to
VHF.
You can monitor VHF channels saved as presets for activity and
automatically switch to an active channel.
From the VHF media screen, select Scan .
Adjusting the VHF Squelch
NOTE: Your media player must support VHF radio to use this
feature.
1
From the VHF source page, select Menu > Squelch .
2
Use the slider bar to adjust the VHF squelch.
Radio
To listen to AM or FM radio, you must have a suitable marine
AM/FM antenna properly connected to the stereo and be within
range of a broadcasting station. For instructions on connecting
an AM/FM antenna, see the stereo installation instructions.
To listen to SiriusXM
® radio, you must have the appropriate
equipment and subscriptions ( SiriusXM Satellite Radio ,
page 39 ). For instructions on connecting a SiriusXM Connect
Vehicle Tuner, see the stereo installation instructions.
To listen to DAB stations, you must have the appropriate
equipment ( DAB Playback , page 38 ). For instructions on
connecting a DAB adapter and antenna, see the installation
instructions provided with your adapter and antenna.
Setting the Tuner Region
1
From the media screen, select Menu > Installation > Tuner
Region .
2
Select an option.
Changing the Radio Station
1
From the media screen, select an applicable source, such as
FM .
2 Select or to tune to a station.
Changing the Tuning Mode
You can change how you select a station for some media types,
such as FM or AM radio.
NOTE: Not all tuning modes are available for all media sources.
1
From the media screen, select Menu > Tuning Mode .
2
Select an option.
3
If necessary, select Select .
Presets
You can save your favorite AM stations and FM stations as
presets for easy access.
You can save your favorite SiriusXM channels if you are
connected to an optional SiriusXM tuner and antenna.
Saving a Station as a Preset
1
From an applicable media screen, tune to the station to save
as a preset.
2 Select Presets > Add Current Channel .
Selecting a Preset
1
From an applicable media screen, select Presets .
2
Select a preset from the list.
3 Select Tune to Channel .
Removing a Preset
1
From an applicable media screen, select Presets .
2
Select a preset from the list.
3
Select Remove Current Channel .
DAB Playback
When you connect a compatible Digital Audio Broadcasting
(DAB) module and antenna, such as the FUSION
®
MS-
DAB100A to a compatible stereo, you can tune in to and play
DAB stations
To use the DAB source, you must be in a region in which DAB is
available, and select the tuner region ( Setting the DAB Tuner
Region , page 38 ).
Setting the DAB Tuner Region
You must select the region you are in to receive DAB stations
properly.
1
From the media screen, select Menu > Installation > Tuner
Region .
2 Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a
compatible DAB module and antenna (not included) to the
stereo. Because DAB signals are broadcast in select countries
only, you must also set the tuner region to a location where DAB
signals are broadcast.
1 Select the DAB source.
2
Select Scan to scan for available DAB stations.
When scanning is complete, the first available station in the
first ensemble found begins playing.
NOTE: After the first scan is complete, you can select Scan
again to re-scan for DAB stations. When the re-scan is
complete, the system starts playing the first station in the
ensemble you were listening to when you started the re-scan.
Changing DAB Stations
1
Select the DAB source.
2
If necessary, select Scan to scan for local DAB stations.
3
Select or to change the station.
When you reach the end of the current ensemble, the stereo
automatically changes to the first available station in the next
ensemble.
38 Media Player