Garmin GPSMAP 4010 Скачать руководство пользователя страница 8

Страница: 8 / 68

GPSMAP

4000/5000 Series Owner’s Manual

Getting Started

Getting Started

Inserting and Removing SD Cards

Your unit supports Secure Digital (SD) cards. Insert optional BlueChart

g2 Vision

SD cards to

view high-resolution satellite imagery, and aerial reference photos of ports, harbors, marinas, and

other points of interest. Insert blank SD cards to transfer data such as waypoints, routes, and tracks

to another compatible Garmin unit or a computer. The SD card slot is located on the lower-right

corner of the unit.
To insert the SD card, open the access door and press the SD card in until it clicks. Press the card in

again and release it to eject it from the chartplotter.

Card label

GPSMAP 4010 and 4012

Card label

GPSMAP 4008 and 5000 series

Restoring Factory Settings

You can restore your unit to the original factory settings.

CAUtION:

This procedure deletes any information you have entered.

To restore factory settings:

1. From the Home screen, select

Configure

System

System Information

2. Select

Factory Settings

3. Select

Reset

to restore all factory settings or select

Back

to cancel.

Viewing System Information

You can view the software version, basemap version, and unit ID number for your chartplotter.

You may need this information to update the system software or to purchase additional map data

information.

From the Home screen, select

Configure

System

System Information

Using Simulator Mode

Simulator Mode turns the GPS receiver off for use indoors or for practice. The unit does not track

satellites in simulator mode.

CAUtION:

Do not try to navigate using Simulator Mode because the GPS receiver is turned off. Any

satellite signal strength bars shown are only simulations and do not represent the strength of actual

satellite signals.

To turn Simulator Mode on:

1. From the Home screen, select

Configure

System

Simulator

2. Select

Setup

to set speed, track control, position, simulator time, and simulator date.

Содержание GPSMAP 4010





































































Результаты поиска

Содержание GPSMAP 4010

Отзывы:

Похожие инструкции для GPSMAP 4010

Бренды по названию

Популярные бренды

Garmin GPSMAP 4010, Руководство пользователя

Результаты поиска

Содержание GPSMAP 4010

Отзывы:

Похожие инструкции для GPSMAP 4010

Бренды по названию

Популярные бренды