Garmin GPSMAP 4000 Series Скачать руководство пользователя

Страница: 8 / 74

GPSMAP 4000 Series Owner’s Manual

ettInG

tarted

ettin

tarted

To turn the Simulator Mode on:

From the Home screen select

Configure

System

Simulator

Select

Setup

to set speed, track control (simulated heading), position, simulator time, and

simulator date.

Understanding the Home Screen

Use the Home screen to access all other screens.

NOTE:

Options on this screen vary based on the unit type and optional connected network devices.

Charts

—provides Navigation chart, Mariner’s Eye, Mariner’s Eye 3D, Fish Eye 3D, Fishing

Chart, and Radar Overlay (

page 5

NOTE:

Mariner’s Eye 3D, Fish Eye 3D, and Fishing Charts are available only if you use a BlueChart

g2 Vision SD card.

Radar

—sets up and displays radar (only available if the unit is connected to a radar module)

(

page 39

Sonar

—sets up and provides sonar information (only available if the unit is connected to a

Garmin sonar module) (

page 44

Weather

—sets up and displays various weather parameters, including precipitation, forecast,

fishing, sea conditions, and visibility (only available if the unit is connected to a weather module

and you have an XM subscription) (

page 48

Combinations

—sets up the screen to view a chart, sonar, radar, and video in a 2 or 3-field split

screen (

page 18

Where To?

—provides navigation features (

page 20

Information

—shows information including tides, currents, celestial data, user data, information

about other boats, gauges, and video (

page 26

Configure

—allows you to view and edit your unit and system settings (

page 31

•

•
•

•

Содержание GPSMAP 4000 Series











































































Результаты поиска

Содержание GPSMAP 4000 Series

Отзывы:

Похожие инструкции для GPSMAP 4000 Series

Бренды по названию

Популярные бренды

Garmin GPSMAP 4000 Series, Руководство пользователя

Результаты поиска

Содержание GPSMAP 4000 Series

Отзывы:

Похожие инструкции для GPSMAP 4000 Series

Бренды по названию

Популярные бренды