5. When using a map loaded to a data card, you can view
detailed information about an individual map, highlight the
Map Name, and press
ENTER
. Highlight
OK
, and press
ENTER
to exit the Map Information Page.
Individual Map Information Page
Showing the individual maps that are in the selected map family.
6. To select/deselect individual maps (data card maps only) to
show on the Map Page, highlight the box next to the map you
want, and press
ENTER
to check or uncheck the
Show
box.
OR
Press
MENU
, select one of the options (
Show All
,
Hide All
,
or
Show Defaults
), and press
ENTER
.
Map Orientation
There are three map orientation options:
North Up
orients the map
like a paper map.
Track Up
orients the map in the direction of
travel.
Course Up
orients the map so the direction of navigation is
always up. When using Track Up or Course Up, the North arrow
indicates the orientation. To change the map orientation, press
MENU
to open the Map Page. Press
MENU
again. Select
Set Up
Map
, and press
ENTER
for additional information.
Zooming In and Out of the Map
The map display has 28 available map zoom ranges ranging from
20 ft to 800 nm (20 ft to 800 mi or 5 m to 1200 km). The map zoom
range is controlled by the
IN
and
OUT
keys, with the current scale
shown at the bottom right of the data window.
NOTE:
The scale value represents the distance from one end of
the scale bar (
) to the other.
To select a map zoom range (zoom in and out):
Press the
OUT
key to zoom out, press the
IN
key to zoom in.
The GPSMAP 276C has a built-in worldwide database, with more
detailed coverage available through the use of the BlueChart g2 or
MapSource data. The GPSMAP 276C shows cartography as long as
chart information is available for the zoom scale you selected.
GPSMAP 276C Owner’s Manual
1
M
ArIne
M
ode
P
Ages
>
M
AP
P
Age
Содержание GPSMAP 276C
Страница 1: ...GPSMAP 276C chartplotting receiver owner s manual ...
Страница 133: ......
