Using the Man OverBoard (MOB) Function
Use the MOB function to simultaneously mark and set a course to a location
for quick response to emergency situations.
To initiate the MOB function:
1. Press and hold the
NAV/MOB
key, or press the
NAV/MOB
key twice.
2. Press
ENTER
to confirm and begin navigating to the MOB location.
MOB Confirmation Window
When a MOB is initiated, an MOB waypoint with an international MOB
symbol is created and the unit begins navigating to that point. Use any of the
navigation pages to guide you back to the MOB point. The MOB waypoint
is stored in the Waypoint list and can be deleted like any other waypoint.
Creating a Route
To create a route using the Find Menu:
1. Press
MENU
twice to open the Main Menu.
2. Highlight the
Route
tab.
3. Highlight the first available blank route slot, and press
ENTER
.
4. Press
ENTER
again to find items to add to the route.
Route Tab
Adding Points to the route
To create a route graphically:
1. From the
Route
tab, highlight the first blank slot, and press
ENTER
.
2. On the Route Review Page, press
MENU
to open the Options menu.
3. Highlight
Edit on Map
, and press
ENTER
.
4. Highlight a map item, and press
ENTER
.
5. When finished, press
QUIT
twice to return to the Route Review Page.
Options Menu
Creating a new route on the map
Adding Via Points to Your Route
To add Via Points to your route in Automotive Mode:
1. While navigating your route, press
NAV/MOB
.
2. Use the
ROCKER
to select
Edit Vias
, and press
ENTER
. The
Add/Edit Vias Page appears.
3. With the
Add Via Point
button highlighted, press
ENTER
.
Navigate Options
Add Via Point
4. Highlight either
Use Map
or
Find
, and press
ENTER
.
5. If you selected
Use Map
, use the
ROCKER
to select an item on the
map, and press
ENTER
.
If you selected
Use Find Menu
, select an item from the Find menu.
Remember you can press
MENU
while the Find menu is open to find
an item near another location, such as the destination.
6. Highlight
Done
, and press
ENTER
to add the new Via Points.
Before a Via Point is added
Via Point added before
the destination
Marking a Waypoint
To mark your current location:
1. Press and hold
ENTER/MARK
until
the New Waypoint Page appears.
2. To accept the waypoint with the
default name and symbol, highlight
OK
and press
ENTER/MARK
.
To change any information on the
New Waypoint Page, highlight the
appropriate field, and press
ENTER/MARK
. After entering and
confirming your changes, highlight
OK
, and press
ENTER/MARK
.
To create a new waypoint using the Map Page:
1. Press
PAGE
until the Map Page appears.
2. Move the pointer to a map location or map feature.
3. Press and quickly release
ENTER/MARK
to capture the pointer
location.
If you have highlighted a map feature, an information page appears
after you press
ENTER/MARK
. Use the
ROCKER
to highlight
Save
,
and press
ENTER/MARK
to save the item as a waypoint. The New
Map Waypoint Page appears.
4. To accept the waypoint with the default name and symbol, highlight
OK
, and press
ENTER/MARK
.
To change any information on the New Map Waypoint Page, highlight
the appropriate field, and press
ENTER/MARK
. After entering and
confirming your changes, highlight
OK
, and press
ENTER/MARK
.
New Waypoint Page
