Garmin GPSMAP 2106 - Marine GPS Receiver Скачать руководство пользователя страница 18

Страница: 18 / 106

GPSMAP 2106/2110 Owner’s Manual

ASIC

PERATION

SING

THE

GPSMAP 2106/2110

Using Additional Map Data

The GPSMAP 2106/2110 comes standard with a built-in basemap showing cities,

interstates, coastline detail, and U.S. Tide stations. Optional preprogrammed

Garmin data cards and MapSource CD-ROMs enhance the versatility of your

GPSMAP 2106/2110. With optional BlueChart cartography, you can access

marine navaids, wrecks, obstructions, anchorage locations, shaded depth

contours, intertidal zones, spot soundings, port plans, and more.
The GPSMAP 2106/2110 supports Garmin’s new BlueChart

™

technology.

This cartography features integrated mapping, 2-D or 3-D map perspective, tide

and current data, improved IALA symbols, navaids, marinas, boat ramps, roads,

and more. You can also access additional data including highly detailed coastal

roads and points of interest such as restaurants, lodging, and local attractions.

Full-color aerial photographs of ports, marinas, bridges, and navigational

landmarks are also included on many preprogrammed BlueChart g2 data cards.
See your Garmin dealer or visit the Garmin Web site (

www.garmin.com

) for more

information on available preprogrammed Garmin data cards and other MapSource

programs.

Using the Map Pointer

Use the map pointer to pan away from your current location and scroll to other

map areas around the world (even outside of your current detail coverage). As

you pan past the edge of the current map display, the screen actively scrolls

forward to provide continuous map coverage. An hourglass symbol appears by

the pointer while the unit is busy drawing new map detail.
Controlled by the

ROCKER

, the map pointer is an important tool that can be

used to pan to other map locations, mark and edit waypoints and routes, and

review location data of on-screen map items and waypoints.

Map item name, pointer coordinates,

distance, and bearing

Map

pointer

Using the Map Pointer (BlueChart Data Shown)

To move the map pointer:

Press the

ROCKER

to move the map pointer up, down, left, right, or

diagonally.

Содержание GPSMAP 2106 - Marine GPS Receiver











































































































Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды

Garmin GPSMAP 2106 - Marine GPS Receiver, Руководство пользователя

Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды