Installing/Removing the Unit
1. Connect the wiring harness and antenna cable to the unit, making sure
the locking rings are fully tightened on both cables (Figure 4).
2. Slide the unit into the pocket. When the unit is fully inserted, it will click
into place at the lock tabs (Figure 5). It may be necessary to apply some
pressure when inserting the assembly into the pocket to compress the
foam rubber pads.
3. To remove the unit from the pocket, press the lock tabs toward the unit
while sliding the unit out of the pocket (Figure 6).
© 2004 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062, U.S.A
Garmin (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park In dus tri al Estate, Romsey, SO51 9DL,
U.K.
Garmin Corporation
No. 68, Jangshu 2
nd
Road, Shijr, Taipei County, Taiwan
www.garmin.com
Part Number 190-00311-02 Rev. A
Figure 5
Figure 6
Figure 4
Lock Tabs
