4
GPS 17 Installation Guide
M
OUNTING
THE
GPS 17
To attach the enclosed pole to the base:
1. Thread the cable though the pole mount.
2. Align the tab on the pole to the notch on the base.
3. Use the enclosed screws to secure the pole to the
base.
Figure 2: Attaching the Pole Mount to the Base
To mount the GPS 17 with cable outside mount:
1. Place the cable in the vertical slot along the side of
the base of the unit.
2. Screw the GPS 17 onto the mount. Do not
overtighten: it is possible to tighten the unit to the
point that the cable may be cut in two.
3. Fill the remaining gap in the cable exit with marine
sealant.
Figure 3: Running the Cable Outside of the Mount
